PEMAC 050PA
The Pemac 050PA is a horizontal end milling machine with automatic feed. Milling of intermediate angles, +45° / 90° / -45°. Quick tool change with pneumatic control. Full guarding of work zone. 2 x horizontal and 1 x vertical clamps are both operated pneumatically. Intermediate angles are obtained thanks to the possibility of varying the angle of tilt from -45° to +45° with manual movement. The position can be read on the graduated scale.
Adjustable 6-position depth stop. The quick tool change is operated pneumatically via the control panel.
This machine is also available with a manual feed (type 050 P).
TECHNICAL DETAILS
Motor power (kW) | 1,5 |
RPM | 2.800 |
Travel milling (mm) | 420 |
Max. height cutter (mm) | 125 |
Max. diameter cutter (mm) | 250 |
Diameter cutter sleeve (internal/external) (mm) | 27/32 |
6-position depth-stop | ● |
2 horizontal and 1 vertical pneumatic clamp | ● |
Milling variable angles | – 45° | 0 | +45° |
Quick tool change | ● |
Machine foot | ● |
Angle settings | – 45° | 0 | + 45° |
Quick change system for changing milling cutters | ● |
STANDARD ACCESSOIRIES
- 4 pneumatic clamp
- Cutter sleeve with threaded locking ring
- Pneumatic device for quick cutter change
- Set of spanners
- Operations-maintenance manual, spares catalogue
- 5 adjustable stops
OPTIONAL ACCESSOIRIES
- Additional cutter sleeve
- Six stage stop ledge
- Cutters
- Pneumatic cooling
- Spacers for assembling of milling unit